In the present study, a type of bioconjugate was synthesized by post modification of alginate by conjugating temperature-responsive poly(ε-caprolactone-co-lactide)-b-poly(ethylene glycol)-b-poly(ε-caprolactone-co-lactide) and O-phosphorylethanolamine as phosphorylation functional groups. Freely flowing bioconjugate sols at low temperature can transform to stable viscoelastic gels at the physiological temperature (37?°C). Subcutaneous administration of temperature-responsive bioconjugate sols into the dorsal region of Sprague-Dawley rats formed in situ hydrogel. in situ formation of bioconjugate gels in stimulated body fluids at 37?°C showed nucleation and hydroxyapatite mineral growth. Furthermore, hydroxyapatite growth was also found in in vivo gels, which suggested the potential of alginate-based bioconjugate gels as a scaffold for bone engineering. Bone morphogenetic protein 2 (BMP-2)-loaded bioconjugate formed stable gel in vivo, and demonstrated sustained release. BMP-2-loaded bioconjugates exhibited in situ biomineralization in vivo. These results imply that the in situ formation of injectable biomimetic materials has potential for bone tissue engineering applications. Fibrillar gel of pepsin-solubilized collagen from tilapia skin was prepared by self-assembly in neutral phosphate buffer at 28?°C. Then effects of acidic polysaccharides, such as sodium alginate (SA), chondroitin sulfate (CS), and hyaluronic acid (HA), on the formation and properties of self-assembled fibrillar gel were investigated. SA and CS prolonged gelling time, whereas HA had no obvious effect. SA made fibril network denser, while CS and HA induced the presence of larger ordered structures. All the acidic polysaccharides broadened the D-periodicity of fibrils. SA and HA increased the maximum mechanical strength of gel to 39.64 and 34.49?kN/m2, respectively, significantly higher than that of pure collagen gel (14.53?kN/m2), while that only 17.20?kN/m2 after CS introduced. HA had no evident effect on enzymatic resistance, while SA and CS decreased. Therefore, tilapia skin collagen with HA has a higher potential as a biomaterial than that with CS or SA. Cellulose in different forms is increasingly used due to sustainability aspects. Even though cellulose itself is an isolating material, it might affect ion transport in electronic applications. This effect is important to understand for instance in the design of cellulose-based supercapacitors. To test the ion conductivity through membranes made from cellulose nanofibril (CNF) materials, different electrolytes chosen with respect to the Hofmeister series were studied. The CNF samples were oxidised to three different surface charge levels via 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO), and a second batch was further cross-linked by periodate oxidation to increase wet strength and stability. The outcome showed that the CNF pre-treatment and choice of electrolyte are both crucial to the ion conductivity through the membranes. Significant specific ion effects were observed for the TEMPO-oxidised CNF. Periodate oxidated CNF showed low ion conductivity for all electrolytes tested due to an inhibited swelling caused by the crosslinking reaction. https://www.selleckchem.com/products/E7080.html In this study, the impact of drug and hydroxypropyl methylcellulose acetate succinate (HPMCAS) grades physicochemical properties on extrusion process, dissolution and stability of the hot melt extruded amorphous solid dispersions (ASDs) of nifedipine and efavirenz was investigated. Incorporation of drugs affected the extrusion temperature required for solid dispersion preparation. Differential scanning calorimetry and powder X-ray diffraction studies confirmed the amorphous conversion of the drugs in the prepared formulations. The amorphous nature of ASDs was unchanged after 3 months of stability testing at 40?°C and 75% relative humidity. The dissolution efficiency of the ASDs was dependent on the log P of the drug. The inhibitory effect of HPMCAS on drug precipitation was dependent on the hydrophobic interactions between drug and polymer, polymer grade, and dose of the drug. The dissolution efficiency and dissolution rate of the ASDs were dependent on the log P of the drug and solubility and hydrophilicity of the polymer grade respectively. The inhibitory effect of HPMCAS on drug precipitation was dependent on the hydrophobic interactions between drug and polymer, polymer grade, and the dissolution dose of the drug. Cellulose nanomaterial aerogels are macroscopic porous solids with relatively high surface areas and are thus an interesting basis for renewable catalyst materials. Cross-linked acid-base bifunctional catalyst aerogels are produced here from TEMPO-oxidized cellulose nanofibrils (TOCNF) and demonstrated in both batch and flow catalysis. Recently established acid-base modification for catalysis is expanded upon for chemical or physical cross-linking with small molecules and polymers. Low density and relatively high surface area (up to 74?m2?g-1) aerogel catalysts are produced with a variety of processing approaches and then freeze-dried from water or tert-butyl alcohol/water mixtures. Finer pore structure and increased surface area are achieved with tert-butyl alcohol as co-solvent. Chemical cross-linking improved aerogel stability to solvents. Homogeneous and aerogel TOCNF catalysts are shown to be effective acid-base cooperative catalysts for aldol condensation reactions in batch reactions. Continuous flow reactions are performed with glass column reactors packed with aerogel catalysts that showed improved rates relative to batch experiments, while also demonstrating physical stability. Catalyst deactivation in flow reactions is observed and observations of deactivation support previously reported mechanisms of site poisoning by competitive chemisorption of reactants in analogous acid-base catalysts. This report is a key demonstration of cellulose nanofibril aerogels for catalysis in continuous liquid flow reactions. Glioblastoma (GBM), the most common and extremely lethal type of brain tumor, is resistant to treatment and shows high recurrence rates. In the last decades, it is indicated that standard two-dimensional (2D) cell culture is inadequate to improve new therapeutic strategies and drug development. Hence, well-mimicked three-dimensional (3D) tumor platforms are needed to bridge the gap between in vitro and in vivo cancer models. In this study, bacterial cellulose nano-crystal (BCNC) containing polycaprolactone (PCL) /gelatin (Gel) nanofibrous composite scaffolds were successfully fabricated by electrospinning for mimicking the extracellular matrix of GBM tumor. The fiber diameters in the nanofibrous matrix were increased with an increased concentration of BCNC. Moreover, fiber morphology changed from the smooth formation to the beaded formation by increasing the concentration of the BCNC suspension. In-vitro biocompatibilities of nanofibrous scaffolds were tested with U251?MG glioblastoma cells and improved cell adhesion and proliferation was compared with PCL/Gel.